|
|
| (60 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt) |
| Zeile 1: |
Zeile 1: |
| | <!--Case 278709--> |
| <IS_HELP id="HS42"/> | | <IS_HELP id="HS42"/> |
| {{Article table | | {{Article table |
| |commercial_product1=InstalSystem 5 | | |commercial_product1=InstalSystem 5 |
| |p2 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy2="--> | | |commercial_product2=EnergoSystem 5 |
| |p3 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="--> | | |p3 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="--> |
| |p4 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="--> | | |p4 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="--> |
| |category1 =InstalSystem 5#SOFTWARE APPLICATIONS | | |category1 =InstalSystem 5#Lekcje projektowania |
| |category_name1 =SOFTWARE APPLICATION | | |category_name1 =DESIGNUNTERRICHT |
| |c2 =<!--Jest kategoria -> zamienić na: "category2=" i uzupełnić link do sekcji kategorii na stronie głównej produktu--> | | |c2 =<!--Jest kategoria -> zamienić na: "category2=" i uzupełnić link do sekcji kategorii na stronie głównej produktu--> |
| |category_name2 =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...--> | | |category_name2 =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...--> |
| |c3 =<!--if there is the second category, change to->"category3="--> | | |c3 =<!--Jest kategoria -> zamienić na: "category3=" i uzupełnić link do sekcji kategorii na stronie głównej produktu--> |
| |category_name3 =<!--fill up with category "SOFTWARE APPLICATION"/"FUNCTIONALITY"/...--> | | |category_name3 =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...--> |
| |version1 =[[Release notes InstalSystem 5#Version BETA 16.1 Rev. 15.5.17|IS 5.0 Beta 15.1]] | | |version1 =2025-02-27 |
| |v2 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu--> | | |v2 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu--> |
| |v3 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu--> | | |v3 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu--> |
| |v4 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu--> | | |v4 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu--> |
| }} | | }} |
| ==Schulungsinhalt== | | ==Umfang des Unterrichts== |
| Hier werden die wichtigsten und grundlegenden Arbeitsschritte zur Berechnung einer Fußbodenheizung gezeigt.<br/>
| |
|
| |
|
| ==Module und Programmkonfiguration==
| | Der Artikel gibt einen Überblick über die Arbeitsumgebung, die das Paket '''InstalSystem 5''' zur Verfügung stellt, und beschreibt einen grundlegenden, vollständigen Entwurfspfad unter Verwendung dieses Pakets. Das Paket bietet mehrere Module und Funktionen, die miteinander interagieren, so dass verschiedene Installationen innerhalb einer einzigen Projektdatei bearbeitet werden können, ohne umständlich zwischen Programmen wechseln zu müssen. Alle Funktionen, die die Ergonomie des Designs unterstützen, werden in den Artikeln zu den verschiedenen Anwendungen des Programms ausführlich beschrieben, die weiter unten in diesem Artikel verlinkt sind. <br/> |
| * '''InstalSystem 5''' in jeglicher Konfiguration
| |
| * Internetverbindung
| |
|
| |
|
| ==Arbeitsschritte== | | ==Erforderliche Module und Programmkonfiguration== |
| | * Paket '''InstalSystem 5''' in einer Konfiguration, die dem durchgeführten Projekt entspricht. |
| | * Internetverbindung (für die Aktivierung und Aktualisierung des Programms). |
|
| |
|
| ===Vorbereitung der Arbeitsumgebung=== | | ==Videos mit Bezug zum Thema des Artikels== |
| | <br/>{{#ev:youtube|Ql_r_A1Qdns|450||||rel=0}} <br clear="all"/> |
| | Die angegebenen Videos behandeln die in diesem Artikel behandelten Themen und sind keine Aufzeichnung einer Unterrichtsstunde. |
|
| |
|
| ====Zugang zum Programm==== | | ==Zu unternehmende Schritte== |
| Um das Programm auf dem PC zu installieren, wird sowohl die Lizenznummer zur Aktivierung des Programms als auch die Installationsdatei benötigt. Liegt eine Beta-Version vor, kontaktieren Sie '''InstalSoft'''. Die Installationsdatei muss auf eine lokale Festplatte gespeichert werden. Führen Sie nun die Installation durch.
| |
|
| |
|
| ====Installation, Aktivierung, Update==== | | ===Erste Schritte und Informationen über das Paket=== |
| # '''Installation''' - Stellen Sie vor der Installtion sicher, dass die unter [[Technische Spezifikation InstalSystem 5 Programmpaket]] aufgeführten Systemanforderungen erfüllt sind. Folgen Sie den Anweisungen des Installationsassistenten, um das Programm zu installieren.<br/>
| | Das Paket besteht aus einem Manager und einem Editor. Der Manager wird immer nur einmal ausgeführt, während der Editor mehrmals geöffnet werden kann. Das Öffnen eines Projekts, kann aus dem Manager erfolgen, das Speichern, dann nur aus dem Editor heraus. Alle Anwendungen des Programms werden von ein und demselben Editor unterstützt (im Gegensatz zu v4).<br/> |
| # '''Aktivierung''' - Zur Aktivierung des Programms wird der Lizenzschlüssel benötigt.<br/>''Anmerkung:'' Zur Aktivierung muss eine Internetverbindung bestehen.
| | {{Info}} [https://en.help.instalsoft.com/Installation,_activation_and_update_InstalSystem_5_package Installation, Aktivierung und Aktualisierung des InstalSystem 5-Pakets]. |
| # '''Update''' - Das Programm wird ständig weiterentwickelt und aktualisiert. Die kostenlose Installation der Updates wird empfohlen. Der ''InstalSystem 5 Manager'' benachrichtigt Sie regelmäßig über neue Versionen. Nach dem Update ist es dennoch möglich, auch auf die älteren Versionen zurückzugreifen, da diese weiterhin auf dem PC installiert bleiben. Beim Öffnen einer Datei kann die gewünschte Programmversion ausgewählt werden. Informationen über die Änderungen zwischen den einzelnen Versionen können unter [[Information zum Programmstand]] nachgelesen werden.<br/>[[File:Manager-update1.png|900 px|left|thumb|1. Update]]<br clear="all"/>
| |
|
| |
|
| ====Softwarekonfiguration==== | | <br clear="all"/> |
| '''InstalSystem 5''' ist auf verschiedene Arten konfigurierbar. Sie können das Programm je nach Belieben anpassen:
| |
| * Einstellungen für Tastatur, Maus und Pop-Up Menü
| |
| * [https://www.youtube.com/watch?v=Vt9ycSMdp3c| Windows layout (watch the movie)]
| |
| * Vorlagendateien
| |
| * Module
| |
| {{Info}} [[Programm Konfiguration]].
| |
|
| |
|
| ===Projektdatei öffnen und Projektverwaltung=== | | ===Zugriff auf die Anwendung=== |
| | Zu Beginn ist es erforderlich, die Installationsdatei des Programms von unserer Website herunterzuladen: [https://instalsoft.com/de/installation-files-de/ Installationsdateien]. |
|
| |
|
| ====Erstellung eines neuen oder Öffnen eines vorhandenen Projektes====
| | <br clear="all"/> |
| # '''Neue Datei''' - Bei der Erstellung einer neuen Datei können Sie ein Template auswählen, welches für das Projekt genutzt werden soll. Wählen Sie eines der Programmversionen auf Ihrem PC aus, mit dem Sie arbeiten möchten. Wir empfehlen, die neueste Version zu nutzen.
| |
| # '''Vorhandene Datei''' - Auch beim Öffnen einer vorhandenen Datei können Sie die Programmversion auswählen, um an der Datei weiterzuarbeiten. Dadurch wird sichergestellt, dass das Projekt mit der Version, mit der sie ursprünglich erstellt wurde, weiterhin bearbeitet werden kann.<br/>'''InstalSystem 5''' kann auch Dateien lesen, die mit [http://en.help.instalsoft.com/InstalSystem_4 InstalSystem 4] erstellt wurden.<br/>[[File:New-file.png|900 px|left|thumb|7. New file]]<br clear="all"/>
| |
|
| |
|
| ====Verwaltung von Projektdateeien und weiteren Dateien==== | | ===Installation, Aktivierung, Aktualisierung=== |
| # '''Zuletzt bearbeitete Projekte''' - Diese Liste wird automatisch generiert und erleichtert Ihnen den Zugriff auf zuletzt verwendete Dateien unabhängig vom Dateispeicherort (Netzwerk). Über den ''Manager'' können Sie auf diese Liste zugreifen: <br/>[[File:Recently-edited-projectd.png|900px|left|thumb|8. Recently edited projects]]<br clear="all"/> Alternativ können Sie unter dem Datei-Menü des ''InstalSystem Editor'' darauf zugreifen.<br/>[[File:Recently-edited-projects-file.png|900px|left|thumb|9. Recently edited projects]]<br clear="all"/> Zusätzlich können Sie einzelne Projekte auswählen, die immer oben in der Liste erscheinen, unabhängig davon, wann diese zuletzt bearbeitet wurden. Klicken Sie hierfür die '''Pinnnadel''' [[File:Pin-off.png|32 px]] neben dem gewünschten Projekt an, um es oben zu fixieren [[File:Pin-on.png|32 px]].
| | Vergewissern Sie sich vor der Installation, dass der Computer, die in der Anleitung angegebenen System- und Hardwareanforderungen erfüllt: [https://instalsoft.com/de/technische-spezifikationen-der-software/ Technische Spezifikationen der Software].<br/>{{Info}} [https://en.help.instalsoft.com/Installation,_activation_and_update_InstalSystem_5_package Installation, Aktivierung und Aktualisierung des InstalSystem 5-Pakets]. |
| # '''Projektverwaltung''' - Bei der Installation des Programms ist es möglich, einen Standardspeicherort für die Projekte auszuwählen. Dieser ist unter dem Menüpunkt ''Projektverwaltung'' im ''InstalSystem Manager'' aufrufbar. Es wird empfohlen, für jedes Projekt einen eigenen Ordner anzulegen, in dem Sie die einzelnen '''InstalSystem''' Versionen des Projektes (.isproj Dateiendung) sowie alle zusätzlichen Dateien (z.B. JPG, DWG, PDF) speichern können. Bei Dateien, die im .isproj Format abgespeichert werden, wird zusätzlich die Programmversion, mit der sie erstellt wurden, angezeigt.<br/>[[File:Project management.png|900px|left|thumb|10. Project management]]<br clear="all"/>
| |
|
| |
|
| ===Arbeiten mit dem Projekt=== | | <br clear="all"/> |
|
| |
|
| ====Allgemeine Daten==== | | ===Anwendungen konfigurieren=== |
| Beim Anlegen des ersten Projektes sind bereits allgemeine Daten und Standardeinstellungen eingerichtet. Bitte machen Sie sich vor der Bearbeitung des Projektes mit Ihnen vertraut. Diese Einstellungen können jederzeit über das Fenster ''Allgemeine Daten'', das Sie über die Symbolleiste abrufen können, angepasst werden. Detaillierte Informationen über die Einstellungen, die Sie je nach Vorhaben unter ''Allgemeine Daten'' einrichten müssen, werden in den einzelnen Abschnitten der jeweiligen Programmanwendungen beschrieben - siehe hier: [http://de.help.instalsoft.com/InstalSystem_5#Programm-Anwendungen PROGRAMM-ANWENDUNGEN].<br/>[[File:General-data-menu.png|600 px|left|thumb|11. General data]]<br clear="all"/>
| | Paket '''InstalSystem 5''' kann auf verschiedenen Ebenen konfiguriert werden, so dass die Anwendung individuell an die Anforderungen des Benutzers angepasst werden kann.<br/>{{Info}} [https://en.help.instalsoft.com/Software_configuration Konfiguration der Software]. |
|
| |
|
| # '''Projektinfo''' - Eingabe der Projektdaten (Projektanschrift, Bauherr, Planer, Hinweistext) für den Ausdruck und Dokumentation.
| | <br clear="all"/> |
| # '''Berechnungsumfang''' - Auswahl des Berechnungsumfangs (Gewerke) des Projektes.<br/>[[File:Project-scope.png|900 px|left|thumb|12. Project info and project scope]]<br clear="all"/>
| |
| # '''Kataloge''' - in den Katalogen sind allgemeine Daten und Hersteller hinterlegt, die für das Planen gebraucht werden. ['''A special type of catalogues are climatic data.'''] <br> Unter diesem Menüpunkt (Allgemeine Daten\Kataloge) kann die Auswahl der Kataloge für Ihr Projekt begrenzt werden und verbessert die Übersichtlichkeit im Programm. <br/>[[File:General-data-catalogues.png|900 px|left|thumb|13. Catalogues]]<br clear="all"/>
| |
| # '''Baudaten''' - Hier können grundlegende Baudaten festgelegt werden, die abhängig von den gewählten Gewerken angezeigt werden. <br>''Gebäude und Umgebung'' beinhaltet Daten über die Lage des Gebäudes sowie über die standardmäßigen Bestandteile der Gebäudestruktur, wie beispielsweise Heiz- oder Kühlleistungsparameter. <br/>[[File:Builfing-and-surroundings.png|900 px|left|thumb|14. Building and surroundings]]<br clear="all"/>''Stockwerke'': Hier kann die Struktur des Gebäudes festgelegt und bearbeitet werden (Anzahl der Stockwerke, Höhenangaben und grundlegende Daten). Für jedes Stockwerk wird ein separates Zeichnungsblatt generiert. <br/>[[File:Storeys-management.png|900 px|left|thumb|15. Storeys management]]<br clear="all"/>
| |
| # '''Vorauswahl in den Herstellerkatalogen ''' - diese Voreinstellungen werden auf alle geplanten Systemkomponenten übertragen, bei denen das "Standard" (Computer Symbol) angezeigt wird. Diesen Status weisen alle neu gezeichneten Komponenten auf. Der Standardwert kann jederzeit verändert und auf alle gezeichneten (Standard-) Bauteile übertragen werden - zusätzlich kann für jedes Bauteil in der Zeichnung die Einstellungen in der Datentabelle individuell verändert werden. Alternativ können die Standardeinstellungen wiederhergestellt werden. Diese individuell festgelegten Werte können nicht mehr über die Allgemeinen Einstellungen verändert werden. Die entsprechenden Eingabefelder können aber wieder auf -Standard- zurückgestellt werden und reagieren dann wieder auf die Standardeinstellungen. Die ''Allgemeinen Daten'' sind über das gleichnamige Fenster erreichbar. Sie sind in die einzelnen Projektbestandteile gegliedert (wie bspw. ''Wärmesysteme'') ['''und können dort bearbeitet werden.'''] <br/>[[File:Floor-systems.png|900 px|left|thumb|16. Default data for floor heating systems]]<br clear="all"/>
| |
| # '''Einstellungen der Komponentendarstellung und Bearbeitungsparameter''' - die Darstellungsweise der Komponenten (z.B. Farben, Skalierung) und einige Bearbeitungsparameter können für jedes Projekt gesondert eingerichtet werden. Somit können Sie die Darstellung der Zeichnungen ['''and manner of work'''] nach Ihren Wünschen gestalten. Sofern Sie diese Einstellungen auch für andere Projekte übernehmen möchten, können Sie diese als Vorlage speichern - siehe hier:[http://en.help.instalsoft.com/Introduction_to_the_work_with_the_package_InstalSystem_5#Configuration point 3. Template files in Configuration] <br/>[[File:General-data-edit.png|900 px|left|thumb|17. Component appearance]]<br clear="all"/>
| |
|
| |
|
| ====Menübestandteile der Grafikbearbeitung==== | | ===Ein neues Projekt einrichten oder ein bestehendes Projekt öffnen=== |
| Die Projektdaten werden vorrangig in den Fenstern "Grafikbearbeitung" und "Datentabelle" bearbeitet. Wie diese Fenster innerhalb der Ansicht geöffnet und verschoben werden, wird hier beschrieben: [http://en.help.instalsoft.com/Introduction_to_the_work_with_the_package_InstalSystem_5#Configuration Configuration, 2. point]. Die wichtigsten Funktionen sind über die ''Hauptwerkzeuge''-Leiste sowie über das Pop-up-Menü via Rechtsklick abrufbar. Die eingeblendeten Funktionen des Pop-up-Menüs ['''Nicht eher Kontextmenü?'''] verändern sich, je nachdem, auf welches Objekt die Maus zeigt und in welchem Bereich sich diese befindet. <br/>[[File:Graphical-edition-base.png|900 px|left|thumb|18. Basic of graphic editing]]<br clear="all"/>
| | {{Info}} [https://en.help.instalsoft.com/Project_and_application_management Projekt- und Anwendungsmanagement]. |
| # '''Grafikbearbeitung''' - in diesem Fenster können Sie sämtliche grafische Überarbeitungen der Komponenten ['''that make up the building structure or the systems under design'''] vornehmen. Sie können auch zwei dieser Fenster öffnen, um verschiedene Bereiche des Projektes gleichzeitig einblenden ['''und bearbeiten'''] zu können. Die wichtigsten Komponenten dieses Fensters sind Folgende:
| |
| #* '''Zeichenblatt''' - das Fenster der Grafikbearbeitung zeigt das aktuell ausgewählte Zeichenblatt. Ein Projekt kann mehrere Zeichenblätter beinhalten, meist wird eines für jedes Stockwerk genutzt - siehe: [http://de.help.instalsoft.com/Einf%C3%BChrung_zur_Arbeitsweise_InstalSystem_5#Einrichtung_des_Bauwerks EINRICHTUNG DES BAUWERKS]. Das aktive, momentan angezeigte Zeichenblatt kann durch ein anderes ausgetauscht werden, indem Sie ein anderes aus dem Menü in der linken oberen Ecke des Fensters auswählen. ['''PRÜFEN: Es sieht hier so aus, als wäre das in der unteren linken Ecke, kann das sein?''']<br/> [[File:Drawing-sheets-png.png|230 px|]]<br/>
| |
| #* '''Bearbeitungsreiter''' - diese stellen die verschiedenen Ebenen des Zeichenblattes dar. Je nachdem, welcher Reiter bzw. welche Ebene aktiv ist, können bestimmte Komponenten bearbeitet werden. Manche Komponenten können auf mehreren Ebenen bearbeitet werden. Auch die Inhalte der Hauptwerkzeuge verändern sich mit der jeweilig aktiven Ebene. Sie können einstellen, ob eine Ebene angezeigt werden soll oder nicht: Fahren Sie dazu mit der Maus über den gewünschten Reiter und führen Sie einen Rechtsklick aus, um die Optionen anzuzeigen. Das Symbol, welches Sie links von der Reiterbeschriftung sehen können, zeigt die aktuelle Einstellung des Tabs an (ein-/ausgeblendet).<br/> [[File:Tap-state.png|230 px|]]
| |
| #* '''Betriebsmodus''' - ['''apply to editing of building structure or of any system''']. Diese Modi können in der rechten unteren Ecke des Fensters aktiviert/deaktiviert werden.<br/> [[File:Auto-orto.png|120 px|]]
| |
| #** '''ORTO''' - Mithilfe des ORTO Modus können Sie Ihre Linien im rechten Winkel zueinander positionieren. Durch das Klicken und Halten der "Strg"-Taste wird der ORTO Modus vorübergehend aktiviert/deaktiviert. ['''which is very convenient when doing some editing operations.''']
| |
| #** '''GRID''' - Der GRID Modus ist bei der manuellen Anordnung von Rohrdurchführungen und beim Zeichnen von ['''loops within a HCZ'''] hilfreich.
| |
| #** '''AUTO''' - Der AUTO Modus kann genutzt werden, um bspw. Komponenten automatisch an mögliche Verbindungsstellen zu positionieren ['''(sogenanntes "snapping")'''] oder um andere automatische Vorgänge zu veranlassen. Diese hängen von dem Typ des eingefügten bzw. aktuell bearbeiteten Komponenten und die dazugehörige Arbeitsumgebung ab. Durch das Drücken der "Shift"-Taste wird der AUTO Modus aktiviert/deaktiviert. ['''which is very convenient when doing some editing operations.''']
| |
| #** Die Einstellungen für die Modi ORTO und AUTO können in dem entsprechenden Fenster an Ihre individuellen Anforderungen angepasst werden. Dieses Fenster kann in der rechten unteren Ecke des Fensters der Grafikbearbeitung eingeblendet werden.<br/> [[File:Orto-auto-configuration-window.png|250 px|]]<br/>
| |
| #* Sie können durch das Anklicken des Symbols in der unteren rechten Ecke des Grafikbearbeitungsfensters eine Gesamtvorschau des Projektes erhalten. [[File:Preview-button.png|20 px]]
| |
| #* Durch das Klicken des Symbols in der linken unteren Ecke des Grafikbearbeitungsfensters können Sie die Skalierung verändern. [[File:Scale.png|20 px]]
| |
| # '''Datentabelle''' - Die Daten des aktuell ausgewählten Komponenten oder Objektes werden in der Datentabelle angezeigt. Sind mehrere Komponenten desselben Typs gleichzeitig ausgewählt, werden die gemeinsamen Datenfelder angezeigt, um gleichzeitige Anpassungen der Komponenten zu ermöglichen.
| |
| # '''Hauptwerkzeuge''' - Symbolleiste mit den wichtigsten Werkzeugen, Funktionen und Komponentensymbolen. ['''used for editing'''] Die Bestandteile der Symbolleiste ['''whether its complete sections are displayed or hidden and whether the individual icons are active or inactive'''] verändern sich, je nachdem welches Fenster und welche Ebene derzeit aktiv ist. Um sich mit den Symbolen vertraut zu machen, fahren Sie mit der Maus über die Symbole, um eine Beschreibung zu zu erhalten.
| |
| #* Der Abschnitt "Bearbeiten" beinhaltet die generellen Bearbeitungsfunktionen als auch die Funktion, ['''multi-level'''] Vorgänge rückgängig zu machen oder zu wiederholen.<br/> [[File:Edit.png|130 px]]
| |
| #* Der Abschnitt "Anzeige- und Programmfenster" beinhaltet Werkzeuge, die für Änderungen der Ansicht notwendig sind.<br/> [[File:Display.png|130 px]]
| |
| #** '''Herauszoomen''' und'''Heranzoomen''' aus der Ansicht kann durch das Klicken dieser Symbole oder durch das Scrollen des Mausrads erfolgen.
| |
| #** '''Verschieben''' des Zeichenblattes kann durch das Klicken dieses Symbols oder durch Drücken + Scrollen des Mausrades erfolgen.
| |
| #** '''Alles anzeigen''' kann durch das Klicken dieses Symbols oder durch Drücken der F5-Taste erfolgen.
| |
|
| |
|
| ====Einrichtung des Bauwerks====
| | <br clear="all"/> |
| Die Gebäudestruktur bildet die Grundlage des Systementwurfs. Sofern das Gebäude mehrere Stockwerke besitzt, wird für jedes einzelne automatisch ein Zeichenblatt ['''in the form of a plan'''] generiert. Darauf können die Komponenten der Gebäudestruktur und des Systems des jeweiligen Stockwerkes bearbeitet werden. Die einzelnen Bereiche des Projektes werden in verschiedenen Abschnitten (Ebenen) bearbeitet, das gesamte Gebäude und alle entworfenen Systeme aber werden in einem Projekt zusammengefasst.<br>Es gibt einige Vorgehensweisen, um die Gebäudestruktur für die Planung vorzubereiten. Die zu wählende Methode hängt davon ab, welche Datenquellen über die Struktur und Pläne der Stockwerke sowie dem Umfang der zu entwickelnden Planung verfügbar sind.
| |
| # '''Importieren der gesamten Gebäudestruktur'' - Die beste Lösung stellt das Importieren der Daten aus einer gbXML-Datei dar.<br/>Wählen Sie dazu den Reiter ''Grundfläche'' ['''base'''] sowie das Gebäudesymbol aus der Symbolleiste[[File:Gbxml-format.png|30 px|19. Import .gbXML]], um die Importfunktion nutzen zu können. Wählen Sie die entsprechende Datei aus. Der Import startet nun automatisch. Es werden sowohl die Strukturen der Stockwerke als auch die jeweiligen Gebäudekomponenten importiert.
| |
| # '''Importieren von Grundrissen einzelner Stockwerke''' - Bereits existierende Grundrisse der Stockwerke erleichtern die Arbeit. Sofern diese vorhanden sind, muss zunächst die Gebäudestruktur unter "Stockwerke" im Bereich "Allgemeine Daten" festgelegt werden. Die einzelnen Grundrisse müssen in einem der unterstützten Formate hochgeladen werden, wie beispielsweise als DWG, DXF, PDF, BMP, JPG oder viele andere Formate. Am besten eignet sich das Datenformat DWG, da hiermit die ''snapping''-Funktion beim Bearbeiten der Struktur genutzt werden kann. ['''Siehe Abschnitt Grafikbearbeitung'''].<br/> Um den Grundriss zu importieren, wählen Sie den "Grundfläche"-Reiter ['''base'''] und fügen Sie die ''Zeichnung/Grundfläche''-Komponente in das Projekt ein. Sobald die Komponente ausgewählt wurde, werden die verfügbaren Daten unter ''Datentabelle'' dargestellt. Die zu importierende Datei wird im "Grafikdatei" Feld angezeigt.<br> Sofern analoge Grundrisse verfügbar sind, können diese auch eingescannt/fotografiert und importiert werden.<br/>[[File:Import-base.png|900 px|left|thumb|19. Import base]]<br clear="all"/> Der Maßstab der importierten Zeichnung muss unter ''Datentabelle'' unter ''Maßeinheit'' eingestellt werden. Nach dem Import und der Festlegung des Maßstabs aller Stockwerke sollte die Ausrichtung der Zeichnungen überprüft werden. Um diese zu korrigieren, müssen Sie die ''Bezugspunkt'' [[File:Reference-point.png|20 px|]]Komponente nutzen. Anschließend müssen die erforderlichen Komponenten der Gebäudestruktur unter dem Reiter ''Struktur'' platziert werden, wie es im nächsten Abschnitt ''Manuelle Strukturbearbeitung'' beschrieben ist, wohingegen durch die ['''loaded''' --> geladenen/importierten?!] Grundrisszeichnungen die Strukturbearbeitung möglich ist.
| |
| # '''Manuelle Strukturbearbeitung''' - mit dem Programm ist es ebenfalls möglich, die erforderlichen Komponenten der Gebäudestruktur zu zeichnen (insbesondere Räume), welche die Grundlage für den weiteren Entwurf darstellen. <br/> In diesem Fall muss zunächst die Gebäudestruktur unter ''Allgemeine Daten'' im Bereich ''Stockwerke'' festgelegt werden. Um den Bereich, den ein Raum einnimmt, zu definieren, muss unter dem Reiter ''Struktur'' die ''Zimmer''-Funktion in der Symbolleiste aktiviert werden. Auf diese Weise können alle Raumbereiche festgelegt werden.<br/>[[File:Room-scope.png|900 px|left|thumb|20. Room]]<br clear="all"/>
| |
|
| |
|
| ====Verification of the correctness of building structure==== | | ===<IS_TS id=rsDanogi/>=== |
| After defining the structure of the building it is advisable to verify the data that have been entered using the 3D view. The ''3D view'' window is accessible in the list of windows located on the toolbar. The 3D view can be rotated in every direction which enables data verification using views from different sides and at different angles. The 3D view is controlled by means of a cube in the upper right corner of this window or by button ''ctrl'' and middle mouse button ("scroll") combination.<br/>[[File:Construction-building.png|900 px|left|thumb|21. Building structure]]<br clear="all"/>
| | Der erste Schritt bei der Arbeit mit einem Projekt besteht darin, die Standardtypen für die ausgewählten Elemente im Fenster ''<IS_TS id=rsDanogi/>'' richtig einzustellen. <br/>{{Info}} [https://en.help.instalsoft.com/General_data Allgemeine Daten]. |
|
| |
|
| ====Installation edit====
| | <br clear="all"/> |
| The basic way to enter data of the system under design in '''InstalSystem 5''' is graphical editing. Designing consists in placing objects (installation components) in the drawing and making appropriate connections between them. Work is done on plan views of the building storeys. The installation thus created can then be modified in any way, its fragments can be copied, and other operations can be made on it.
| |
| * The software package offers a number of functions that support graphical editing, reduce the scope and time of necessary manual operations at this stage of design. Some components may be inserted or generated automatically. It is also possible to insert and edit groups of components.
| |
| * There is a range of predefined graphical objects that can be used in the project. Examples: ''Project table'', where designer data can be entered and which can be used when printing the project, or interactive elements, such as ''Manifold table'' and ''Component labels''. Upon assigning them to defined system components, they will automatically display current data of these components.
| |
| * It is particularly straightforward and problem-free to make all kinds of modifications to the project - the ergonomics and ease of calculation of the modified design is one of the biggest advantages of the working environment of '''InstalSystem 5'''.<br/>[[File:Graphical-edit.png|900 px|left|thumb|22. Installation edit]]<br clear="all"/>
| |
| '''Detailed information on ''Installation edit'', in the context of the type of system being designed or calculations performed is given in the descriptions of program applications''' - see:[http://en.help.instalsoft.com/InstalSystem_5#Software_applications SOFTWARE APPLICATIONS].
| |
|
| |
|
| ====Verification of the correctness of installation structure==== | | ===Vorbereitung der Gebäudestruktur=== |
| Before detailed component data are appended it is a good idea to check the structure of the system and component connections. Corrections made to the structure may cause changes or even removal of some of the components, then the time spent on entering data would be lost. The following tools are available:
| | Die Gebäudestruktur bildet die Grundlage, auf der die Planung der Anlage erstellt werden kann. </br>{{Info}} [https://en.help.instalsoft.com/Preparation_of_building_structure Vorbereitung der Gebäudestruktur]. |
| # The tool that enables checking connections between system components in the project is the ''Check connections'' function, which is also available through the keyboard shortcut Shift+F2.<br/>[[File:Check-connections.png|900 px|left|thumb|23. "Check connections" function]]<br clear="all"/><br>
| |
| # The tool that enables visual verification of the installation structure is, as is the case with building structure verification, the 3D view. The 3D view can be enabled permanently, which allows verifying system correctness continuously during editing. In this case it is particularly advantageous to work using two display monitors simultaneously. Note, however, that using 3D view slows down the program. When working on a slow computer or working with a large project, it is better to enable 3D view only to verify the status of the project, and to do the design work without opening the 3D view window.<br/>[[File:Installation-project.png|900 px|left|thumb|24. Installation structure]]<br clear="all"/>
| |
|
| |
|
| ====Component data edit====
| | <br clear="all"/> |
| Every component in the project has its set of data. Editing these data is possible in the ''Data table'' after marking that component. This applies to components of the building structure, components of all systems under design, and other components that are objects of the program, such as the "Graphical file" mentioned when discussing the import of storey plan views or the "Print layout". The ''Data table'' can be toggled on/off by selecting it in the ''Window'' menu on the toolbar.<br/>[[File:Dem-data-table.png|900 px|left|thumb|25. Data table]]<br clear="all"/>
| |
| * A significant portion of the data of new components placed in the drawing is appended automatically. This highly facilitates work on the project. The range of automatically appended data differs depending on the type of component and on other factors.
| |
| ** The basic mechanism in this area is propagation of [http://en.help.instalsoft.com/Introduction_to_the_work_with_the_package_InstalSystem_5#General_data General data]
| |
| ** Some data are established based on component location and size / shape of component placed in the drawing
| |
| ** Many detailed data of components that are associated with catalogue data and have a specified catalogue type are read from the catalogue.
| |
| * Any default data can be overwritten with other data at any time. Information on whether the current value is derived from the "General data" or is another type of default data, or whether it is a user-defined value, is in the form of an icon placed to the right of the data field in the ''Data table''. Clicking this symbol changes the data status. In particular it enables reverting to the ''Default'' status.
| |
| ** A ''Computer'' symbol indicates a default value [[File:Computer.png|18 px|]]
| |
| ** A ''Pencil'' symbol indicates a user-specified value [[File:Pencil.png|18 px|]]
| |
| * Data of any component can be entered or modified at any moment when working with the project.
| |
| ** Component data can be edited right after placing the component in the project, and this is recommended for some components. This particularly applies to these components that do not depend on other drawing components and the number of which in the project is low.
| |
| ** In the case of components the number of which is high it is advisable to edit their data at one stage to take advantage of group editing. To this end it is necessary to press and hold the ''Ctrl'' key and click every component to be marked. After marking multiple components, the data fields common to all those marked components will be accessible in the ''Data table'', and every change made to selected data will modify that data for all marked components. Therefore it is very useful to conduct group editing of data of components of the same type, e.g. of many rooms.
| |
|
| |
|
| ====Calculations and diagnostics==== | | ===Bearbeiten der Installation=== |
| Calculations include all operations necessary to obtain complete results: data propagation, component sizing, engineering calculations and automatic graphical editing. All data that have an effect on the selected scope of the project are taken into consideration: general data, building data, drawings of the system under design, parameters of components used to construct the system taken from catalogues. This means that the program automatically provides high level of completeness and consistency of data and results. This approach greatly facilitates reverting to any of the previous stages of editing - after changing selected data, calculations can be conducted again to obtain complete and current results. Ease of reverting provides great comfort and speed of work in the context of calculating various design options, taking into account the changing requirements of the project developer or changes in the structure of the building introduced during the design of the installation.
| | Ausführliche Informationen darüber, wie die Installation bearbeitet werden kann, im Zusammenhang mit der Art der zu planenden Anlage oder der durchzuführenden Berechnungen, finden Sie in den Artikeln, in denen die einzelnen Anwendungen vorgestellt werden:<br/>[https://de.help.instalsoft.com/InstalSystem_5 PROGRAMM-ANWENDUNGEN].<br clear="all"/> |
| # '''Starting calculations''' - the ''Calculation'' section of the ''Main tools'' bar contains tools that enable starting and managing calculations. Calculations can be made for the entire project or for selected scopes.<br/>[[File:Calculations4.png|100 px]]
| |
| # '''Diagnostics and error list''' - at the start data completeness and correctness is verified. Significant errors in the data result in error messages and halted calculations. If there are no significant errors, calculations are completed and the error list is filled with diagnostic messages. These messages provide information on errors that do not halt calculations and warnings and hints regarding the course of calculations and obtained results. The ''Errors'' window is accessible through the ''Display and program windows'' menu. Initially all messages are displayed in bold font. Double clicking on a message enables finding the components or data referred to in the message in all open windows, for instance: ''Graphical edit'', ''Data table'', ''Calculation results''. After the first search the message is displayed in normal font, meaning that it has been "checked". The pop-up menu available after selecting the message and right clicking allows viewing all components which encountered a similar problem. The range of displayed groups of messages can be controlled using the ''Filters'' function.<br/>
| |
| #* '''Errors''' [[File:Errors-png.png|18 px|]] - messages of highest importance, displayed in uppercase. Critical errors halt calculations and must be eliminated. There are also errors that do not halt calculations, but nevertheless they must be closely analysed and rectified.
| |
| #* '''Warnings''' [[File:Warnings.png|18 px|]] - messages of lesser importance than errors, displayed in lowercase letters and they do not block further calculations. Warnings are usually associated with data or results that are presumably incorrect, therefore it is always advisable to read the displayed warnings.
| |
| #* '''Hints''' [[File:Hints.png|18 px|]] - messages intended to remind of or draw attention to some data or results.<br/>[[File:Warnings-list.png|900 px|left|thumb|26. Error list]]<br clear="all"/>
| |
| # '''Calculation results''' - in the '''InstalSystem''' the entire project may have a "calculated" status or a "not calculated" status. First calculation run changes the project status into "calculated". Calculations have an effect on the information displayed in many windows of the application. Importantly, changes made in data after first calculations do not cause deletion of results, results of the last calculations are available. An appropriate message warns of such status of the project. The most important result components:
| |
| #* Tables and lists available in the ''Calculation results'' window.<br/>[[File:Calculation-results.png|900 px|left|thumb|27. Calculation results]]<br clear="all"/>
| |
| #* Components displayed in the project drawing in the ''Graphical edit'' window, for instance results displayed in component labels or graphical components drawn or modified during automatic edit operations.
| |
| #* Information available after completing calculations, but not displayed permanently, for instance detailed results available in ''Graphical edit'' in ''Hints'' appearing in the case of most components when cursor is placed over it.<br/>[[File:Pipe-run-results-hint.png|500 px|left|thumb|28. Pipe-run hint]]<br clear="all"/>
| |
| Detailed information on calculations and results in the context of the various types of systems is given in the descriptions of software applications - see:[http://en.help.instalsoft.com/InstalSystem_5#Software_applications SOFTWARE APPLICATIONS]
| |
|
| |
|
| ====Preparation of drawings for export/printing====
| | <br clear="all"/> |
| After making all the required changes to the project and completing calculations, project components that complement information provided in printouts can be entered into the project. These components have an informative nature, and they do not affect calculations. It is advisable to place them in the project at this stage only, as the iterative work with the project at the earlier stages may require modification also in this respect. Including them at the final stage of work may prove most efficient. <br/>Detailed information on the available types of components in the context of the various types of installations is given in the descriptions of software applications - see:[http://en.help.instalsoft.com/InstalSystem_5#Software_applications SOFTWARE APPLICATIONS].
| |
| * Example '''Component labels''' accessible through ''Main tool'' bar in the ''Labels and graphics section''. A label is placed by selecting the appropriate icon in the toolbar and clicking the component to which the label is to be assigned. Upon marking in the drawing a component with a label, the label style can be selected in the ''Data table''.<br/>[[File:Labels.png|900 px|left|thumb|29. Component label]]<br clear="all"/> The user can configure the label style - see section 5 ''Component appearance configuration and editing parameters configuration'' in [http://en.help.instalsoft.com/Introduction_to_the_work_with_the_package_InstalSystem_5#General_data General data]. The user can create and save his/her own label styles of various configuration.
| |
|
| |
|
| ===Export/print results and drawings=== | | === Tastaturkürzel=== |
| Result tables and drawings can readily be printed or exported in one of the many available formats.
| | Um den Entwurfsprozess zu vereinfachen und zu beschleunigen, können Tastaturkürzel verwendet werden. <br/>{{Info}} [https://en.help.instalsoft.com/Keyboard_shortcuts Tastaturkürzel]. |
| #'''Print tables and lists''' - to print or export it is necessary to open the ''Printouts'' window. The tree displayed on the left side shows the available predefined printout compositions. The number and types of predefined proposals depend on the software version used. A composition can be selected and its content viewed. Then it is only necessary to select ''Print'' to obtain a printout or ''Save'' and, after selecting the target file format, export the results to this format. It is also possible to create and save user-defined printout compositions. These compositions, in addition to the predefined compositions, are then also available in other projects.<br/>[[File:Printouts.png|900 px|left|thumb|30. Print tables and lists]]<br clear="all"/>
| | |
| # '''Print drawings''' - drawings are also printed and exported using the ''Printouts'' window. The tree displayed on the left side, below the table printout compositions, shows the graphical printouts defined for the project. The user can define many different layouts of graphical printout. For the defined layout, printing can be effected a number of times, e.g. after every project modification. The range of pages, its setup, style and other parameters are saved. This enables defining various printouts, e.g. one for exporting to a PDF file, another for sending to a printer, yet another for sending to a plotter. <br/>[[File:Graphical printouts.png|900 px|left|thumb|31. Print drawings]]<br clear="all"/>To set up a graphical printout layout it is necessary to:
| | <br clear="all"/> |
| #* Select ''Printouts'' tab in the ''Graphical editor'' window
| | |
| #* At ''Insetr page layout'' tool is available in the ''Printout and export'' section of the toolbar. This tool enables placing a ''Printout pages'' component in the drawing. To each ''Printout pages'' component placed in the drawing corresponds a separate graphical printout item in the ''Printouts'' window
| | === Schneller Zugriff auf wiederkehrende Daten und Elemente=== |
| #* The ''Printout pages'' component can be configured in the data table - a name should be assigned to it, its size, page layout and other style components can be modified
| | Im Programm ist es möglich, Daten für neue und bestehende Elemente schnell zu bearbeiten. <br/>{{Info}} [https://en.help.instalsoft.com/Quick_access_to_frequently_repeated_data Schneller Zugriff auf wiederkehrende Daten]. |
| #* In the graphical edit area the outline of this component can be dragged by the mouse to an appropriate location in the project drawing. Its size can also be changed by dragging one of the corners, whereas the size is always a multiple of full pages. This way the area of the project to be printed can be marked.<br/>[[File:Printout-pages.png|900 px|left|thumb|32. Printout configuration]]<br clear="all"/>
| | |
| | <br clear="all"/> |
| | |
| | ===Berechnungen=== |
| | Die Berechnungen im Programm beruhen auf den im Artikel dargestellten Normen und Methoden: [https://instalsoft.com/de/aufstellung-der-normen-und-berechnungen/ Aufstellung der Normen und Berechnungen]. <br/>{{Info}} [https://en.help.instalsoft.com/Presentation_of_the_calculations_result Präsentation der Berechnungsergebnisse] |
| | |
| | <br clear="all"/> |
| | |
| | ===Automatische Schemen=== |
| | Das Programm bietet die Möglichkeit, automatische schematische Ansichten der geplanten Anlagen zu erstellen. <br/>{{Info}} [https://de.help.instalsoft.com/Automatische_Erzeugung_von_schematischen_Ansichten Automatische Erzeugung von schematischen Ansichten] |
| | |
| | <br clear="all"/> |
| | |
| | ===Export / Ausdruck von Ergebnissen und Zeichnungen=== |
| | Die Ergebnisse und Zeichnungen lassen sich in verschiedenen Formaten exportieren/drucken.<br/>{{Info}} [https://en.help.instalsoft.com/Export_/_print_results_and_drawings Exportieren / Drucken von Ergebnissen und Zeichnungen]. |
|
| |
|
| [[Category:InstalSystem 5]] | | [[Category:InstalSystem 5]] |
| [[Category:SOFTWARE APPLICATION]] | | [[Category:DESIGNUNTERRICHT]] |
| [[en:Introduction to the work with the package InstalSystem 5]]
| |
| [[pl:Wprowadzenie do pracy z pakietem InstalSystem 5]]
| |
| <!--Lista kategorii produktów handlowych, których artykuł dotyczy-->
| |
|
| |
|
| <!-- Do not write text below this tag --> | | <!-- Do not write text below this tag --> |
| <br class="iwlinks"/>[[zh-cn:如何使用InstalSystem 5软件包进行设计|如何使用InstalSystem 5软件包进行设计]][[fa:شروع کار با InstalSystem 5|شروع کار با InstalSystem 5]][[it:Introduzione al lavoro col pacchetto InstalSystem 5|Introduzione al lavoro col pacchetto InstalSystem 5]] | | <br class="iwlinks"/>[[pl:Wprowadzenie do pracy z pakietem InstalSystem 5|Wprowadzenie do pracy z pakietem InstalSystem 5]][[en:Introduction to the work with the package InstalSystem 5|Introduction to the work with the package InstalSystem 5]][[it:Introduzione al lavoro col pacchetto InstalSystem 5|Introduzione al lavoro col pacchetto InstalSystem 5]][[fa:شروع کار با ورژن 5|شروع کار با ورژن 5]][[zh-cn:如何使用InstalSystem 5软件包进行设计|如何使用InstalSystem 5软件包进行设计]] |